價格：免費
更新日期：2019-02-07
檔案大小：27M
目前版本：0.2
版本需求：Android 5.0 以上版本
官方網站：mailto:mobile.toys.tools@gmail.com
Email：http://www.netformvision.com/en/privacy/TemperatureAlarmForFLIRONE/privacyPolicyTemperatureAlarmForFLIRONE.pdf
聯絡地址：288/5 Sok. No:10 D14 Colakoglu Center, 35535 Bayrakli - Izmir / TURKEY
Important: You will need to have a FLIR ONE device for this app to run.
Temperature Alarm is an intelligent, easy to use application that detects high and/or low temperature overflows automatically by using FLIR ONE infrared camera.
Temperature Alarm can be used for many purposes such as room temperature control, mass production, security. You can use the app for your other specific requirements.
Temperature Alarm operates in day & night night. When you run Temperature Alarm, you can observe any hotter or colder pixels in your FLIR ONE field of view on your screen. In addition, you can enable alarm sound, can make phone call in case of any alarm where available.
You can also monitor status of your another device in your Wifi network. If you have no Wifi access point available, you can also monitor another device using peer to peer Wifi Direct (P2P) infrastructure.
FEATURES;
* Temperature Alarm automatically detects any hotter or colder pixels of your specified level and plots them on your device screen.
* Temperature Alarm automatically detects the overflow in temperature mean and the range in the detection area.
* Temperature Alarm draws an icon on the screen when any temperature overflow is detected.
* Temperature Alarm sketches temperature overflow history on the device screen. Therefore, you can have detailed information.
* User can change options for alarm speaker, temperature detection rectangles display or temperature detection history display.
* User can optionally save image frames causing alarm. User can display these recorded pictures any time.
* Temperature Alarm enables you to set two types of alarms:
a) Instant Alarm: The app raises instant alarm and displays alarm icon in case of any temperature overflow.
b) Continuous Alarm: The app raises alarm sound and displays alarm icon in case in case of any temperature overflow for a specified time period both set by user. Alarm state goes until terminated by user.
* This application enables you to remote monitor your FLIR ONE device state via Wifi or WifiDirectP2P connection.
HOW TO USE:
* Tune your application via Settings Window.
* Fix your device by facing the FLIR ONE camera looking to the area you want to track.
* Start the application.
* After countdown the detection starts.
SETTINGS:
DETECTION
Temperature Unit
* Select temperature unit, Celcius (°C) or Fahrenheit (°F).
Detection Rules
* Define detection rule for hot temperatures. You can check if any pixel or if the mean temperature is hotter than a predefined threshold.
* Define detection rule for cold temperatures. You can check if any pixel or if the mean temperature is colder than a predefined threshold.
* Define detection rule for temperature range. You can check if the temperature range in your camera field of view is higher and/or lower than predefined threshold.
ALARM
* Alarm Type: Instant Alarm or Continuous Alarm Mode.
* Alarm Sound: Enable alarm sound or mute.
* Save Picture on Alarm: Saves the current picture in case of alarm.
* Call Phone on Alarm: Calls selected phone number in case of alarm. (only valid in phone sets and in Continuous Alarm Mode)
DEVICE
* Detection Rectangles: Draw rectangular overflow region plots on the device screen or not.
* Detection History: Draw overflow history bubbles on the device screen or not.
* Publish Wifi Messages: You can set your device as Wifi message publisher. Receiver devices monitor the status of the publisher by Monitor Wifi Window.
WIFI DIRECT (P2P)
* Sender/Receiver: You can set your WifiP2P device as message sender or receiver. Receiver devices monitor the status of connected peer by Monitor Screen.
